Search
NewTimes Hair logo

Gross Weight

0.11 kg

Base Material

Flex lace base with 1" clear PU front and 2" clear PU on the sides and back

Hair Type

Human hair

Base Size

8"x10"(20.3cm x 25.4cm)

Front Contour

Standard

Hair Length

5"/12.7cm

Hair Density

Light/Medium to Medium(110%)

Hair Curl

30mm

Hair Color (LTD COLOR RING)

#1, #1A, #1B, #1B05, #1B10, #1B20, #1B30, #1B40, #1B50, #1B65 Human Grey, #1B80 Human Grey, #2, #205, #210, #220, #230, #240, #250, #3, #305, #310, #320, #330, #340, #350, #365 Human Grey, #380 Human Grey, #4, #405, #410, #420, #430, #440, #450, #4ASH, #5, #520, #540, #565 Human Grey, #580 Human Grey, #6, #620, #640, #7, #720, #740, #7ASH, #17, #1720, #1740, #18, #22, #60 Human Grey

Hair Direction

Freestyle

Bleach Knots

No bleach

Yearly Plan

2-3 pieces

NEW AUSTRALIA PRO French Lace Hair System Toupee With a Wider PU Perimeter (10)
NEW AUSTRALIA PRO French Lace Hair System Toupee With a Wider PU Perimete Single split knot
NEW AUSTRALIA PRO French Lace Hair System Toupee With a Wider PU Perimete Double split knot
NEW AUSTRALIA PRO French Lace Hair System Toupee With a Wider PU Perimeter base cutting guide
new australia base cutting guide
front shape standard new timeshair

FAQs

Our New Australia Pro is a hair system made with a breathable lace base that's super comfortable on the scalp and undetectable at the same time. Our New Australia Pro also has a Swiss lace front and is strengthened by a skin perimeter, which also makes installation a breeze. Hollywood Lace Hair Systems by Newtimes Hair are highly appreciated by wearers worldwide for their undetectable and comfortable lace.

Step 1: Using scissors, cut some tape into thin, short pieces. Apply the small tape pieces to the perimeter of the base. Since the hair system tape is double-sided, you need to peel off the protective paper on the other side.

Step 2: If your customer is not bald on top, shave the remaining hair. Try to shave an area that fits the size of the toupee. Use rubbing alcohol to clean the New Australia Pro and your customer's head. It is very important to clean off all dirt and scalp oil before taping.

Step 3: Choose where you want the New Australia Pro to be and make marks on the head.

Step 4: Position the New Australia Pro, and slowly apply it to the scalp from the front of the head to the back. Make sure you do not press the tape onto your customer's baby hair during this process. Continue to apply pressure to ensure the toupee is completely secure to the head.

Step 5: Style the hair as your customer desires.

Having the New Australia Pro cut down to your client's size is not as complicated as it may seem. All you need is scissors, a marker, and a measuring tape.

To begin with, you need to take the tape and measure out the base size your customer wants and mark those points with the marker. You need to do this for both the width and the length of the base.

Then, you can join up the marks to make one solid line around the base of the ***keyword3***.

Before you pick up the scissors, you need to pull the hair back behind the line you marked out.

Then, carefully cut along the line and make sure the hair stays behind the line; otherwise, you will end up cutting the hair off of the New Australia Pro by mistake.

If you do end up cutting the hair, you will be left with short pieces of hair around the hairline, and they will not look very natural.

Step 1: Remove the tape by slowly peeling it away from the polyurethane areas of the New Australia Pros. If it is difficult to peel the tape off, try to soak the men's lace wigs in water first.

Step 2: Soak the men's lace wigs in liquid solvent. Soaking times may vary depending on the type of lace hair system and tape used. Thirty minutes is enough in most cases.

Step 3: Take the men's lace wigs out from the solvent and lay it in a sink with the hair down. Gently remove the residue with a brush. After getting the residue off, place your unit back into the solvent for a couple of minutes.

Step 4: Move your men's lace wigs from the solvent back into the sink. Gently glide the brush across the edge of the base and out through the hair, and all the remaining residue should slide off easily. After a few minutes of brushing, rinse your New Australia Pro with lukewarm water down through the base.
At this point, the men's lace wigs should be clean and clear of the old tape residue.

There are many reasons why it is recommended to buy New Australia Pros from New Times Hair. Here are a few of the most important ones:

Superior lace material quality
All lace materials used in the production of our New Australia Pros are carefully sourced from the most reliable and reputable European suppliers, guaranteeing that the New Australia Pros you get from us are the classiest on the market.

Large variety for your customers' choices
At New Times Hair, there are different types of New Australia Pros available. Whether it is stock or custom New Australia Pros, we can fulfill all of your customers' needs.

Extremely competitive wholesale prices
New Times Hair is widely recognized as a hair system manufacturer that offers the best value-for-your-money New Australia Pros. Indeed, it is very hard to find another hair replacement manufacturer that can offer such top-notch New Australia Pros for prices lower than ours. We put our reputation and client satisfaction ahead of everything. By offering lower prices, we want our lace toupees to reach more and more people who are struggling with hair loss and help them live better lives!

30-Day free return policy
New Times Hair offers a 30-day free return policy for our New Australia Pros. If you want to return your order after receiving it for any legitimate reason, we will replace it for free or give you a full refund. This policy should alleviate any concerns you have regarding purchasing from overseas. You can essentially try our New Australia Pros for the cost of the shipping fee.